Insert A Sterile Lancet Into The Lancing Device; Twist The Protective - OneTouch Select Plus Flex Instructions For Use Manual

Yellow= 5mm Red=7mm margin
Taking a test
3

2. Insert a sterile lancet into the lancing device

Align the lancet as shown
here, so that the lancet fits
into the lancet holder. Push
the lancet into the device
until it snaps into place and is
fully seated in the holder.

Twist the protective

cover one full turn until it
separates from the lancet.
Save the protective cover
for lancet removal and
disposal. See page 59.
Type: Project File Name: 3130451 Revision: 1
Effectivity Date: Mar 18 2015
Statement of Use: Verify status before each use
PF3130451Rev1_OTSPF_OB_I_GB_en_zug_R2.indd 42
42
Status: Current State: Released
3/12/15 11:35 AM