Dark Adjustment
The meter is equipped with automatic dark stream compensation with temperature sensor, which is preset during setup at the factory. Dark
adjustment is usually unnecessary within the specified operating temperature range.
Dark adjustment can be conducted as follows, but the meter is reset to the factory default value when it's switched off in order to prevent erroneous
measurements.
Dark adjustment
MENU – Memory
4.6
Data storage to the micro SDHC memory card offers the following setting options.
Auto Save
The measured values for the last measurement are saved either manually by briefly pressing the DATA key, or
automatically after every measurement. The auto save function can be activated in this menu.
Auto save
Spectrum
Storage of the spectral power distribution to the file can be either deactivated, or it can be interpolated to 5 nm steps or
with original sensor resolution.
Spectrum
Cancel - Execute
Please cover the sensor!
On - Off
Off – 5 nm - Original
Gossen Foto- und Lichtmesstechnik GmbH
Cancel - Adjust
23
Need help?
Do you have a question about the MAVOSPEC BASE and is the answer not in the manual?