Functions; Switching The Meter On; Measurements; Functions 3.1 Switching The Meter On - Gossen MetraWatt MAVOSPEC BASE Operating Instructions Manual

3

Functions

3.1

Switching the Meter On

Use the
measurement
key to switch the
meter on.
3.2

Measurements

Press the
measurement
key to start.
Possible from
any measured
value window.
The meter
is initialized ...
A measurement
is triggered and
the measured
values appear
in the display
field.
Gossen Foto- und Lichtmesstechnik GmbH
... and the initial screen
appears with an empty
display field.
Configurable Individual Functions in the MENU
Units of measure
Decimal separator
Auto int. time
Int. time
Averaging
M
Auto save
Report
Spectrum
CIE standard
CRI standard
lx / °C - fc / °F
Comma/point
On/off
10 to 3000 ms
in 10 ms steps
1 to 5
On/off
Display presetting
Color/simple
1931 / 1960 / 1976
Bar / table / spider
13