Controls - Gossen MetraWatt MAVOSPEC BASE Operating Instructions Manual

2.2

Controls

DATA Key
Press key briefly:
Storage of the last measurement,
inactive in case of automatic storage
Press and hold:
Retrieve stored measured values,
stop current retrieval operation
After switching the device
!
on, the settings used for the
last work cycle are
displayed.
MENU Key
Open menu,
exit menu
Ring Controller
Measured value view:
Report, data: scroll through the measured value list.
CIE: Switch amongst 1931 - 1960 – 1976.
Up/down
CRI: Switch amongst table - bar – spider.
Menu view:
Scroll through the parameters list.
Measured value view:
Switch amongst report - CIE - CRI – data.
Left/right
Menu view:
Menu item selection, parameter display,
exit parameter display
Gossen Foto- und Lichtmesstechnik GmbH
DATA + MENU Key
Pressing and holding both of these keys
simultaneously switches the device off.
Measurement Key
Measurement:
Briefly press the measurement key.
Settings:
Acknowledge selection.
Device in sleep mode:
Switch device on.
11