Menu - Settings - Gossen MetraWatt MAVOSPEC BASE Operating Instructions Manual

MENU – Settings
4.4
All settings apply to the display at the device as well as the stored measured value file. Where the decimal separator and date are concerned, country
specific adaptation may be required in order to assure that the CSV file is read in correctly by the respective software program.
Units of Measure
Units of measure can be switched from the metric system to the imperial system. Illuminance in Lux (lx) is then changed to
foot-candles (fc) and temperature is changed from degrees Celsius (°C) to degrees Fahrenheit (°F).

Units of measure
Decimal Separator
The decimal comma (,) is used in some countries as the decimal separator, and the decimal point (.) in others.

Decimal separator
Hour Format
Some countries use a 24 hour clock (24h), and others use a 12 hour clock (12h) together with the abbreviations a.m. (ante meridiem) for before noon
and p.m. (post meridiem) for afternoon.

Hours
Date Format
The date is written differently in the various countries. The following settings are possible:

Date format
Default Settings
The meter is reset to the default settings described in section 4.1 but date and time are retained.

Default settings
fc / °F - lx / °C
. (point) - , (comma)
24h - 12h
dd.mm.yyyy (day.month.year) - mm/dd/yyyy (month/day/year) - yyyy/mm/dd (year/month/day)
Cancel - Reset
Gossen Foto- und Lichtmesstechnik GmbH 21