Power Button; Receiver Status Leds - Topcon GR-5 Operator's Manual

Power Button

The power button turns the receiver on and off. When turning the receiver on, press the Power button until the LEDs
briefly flash. When turning off the receiver, press the Power button until the LEDs go out.

Receiver Status LEDs

There are four status LEDs to provide you information about the battery life, tracked satellites, memory capacity, and
Bluetooth wireless connectivity. This section describes the color and behavior of each LED.
Power Button
Press the power
button for about 1
second to turn the
receiver on/off.
FUNCTION
Power
Button
Figure 8: Power Button Functions
P/N: 7010‐1004
FUNCTION
20