Sim Card Slot; Sim Cards; Installing The Sim Card - Topcon GR-5 Operator's Manual

SIM Card Slot

The SIM card slot is located to the right of the LED Display Panel inside the battery compartment. It enables you to install
a standard SIM card into the receiver. Once installed, the SIM card provides a unique identification for the receiver's HSPA
module and enables the receiver's HSPA functionality based on the subscribed services (the receiver board accesses the
HSPA module, which accesses the SIM card). The SIM card usually remains inside the receiver. You can access the HSPA
module, with the SIM card installed, via TRU for configuration purposes. A SIM card can be purchased from a local cellular
provider.
The GR‐5 receiver, equipped with a CDMA module, does not require a SIM card and is only approved to work
on a Verizon® wireless network. Note the MEID # printed on the GR‐5 unit or extracted from TRU, and call
Verizon to activate service on the CDMA module. installed on the GR‐5 receiver.

SIM Cards

The SIM card must have GPRS support to communicate over a TCP/IP network

Installing the SIM Card

1. Make sure the receiver is turned off.
2. Remove the detachable battery to the right of the LED Display panel.
3. Carefully insert the SIM card, label‐side up, into the SIM card slot located at the top of the battery compartment.
Once the receiver is turned on, the receiver board will detect the SIM card, and it will be ready to use as needed.
SD/SDHC and SIM Card Slots
.
P/N: 7010‐1004 18