CipherLab RS31 Reference Manual page 146

RS31 Mobile Computer
HOW TO OUTPUT
After the output destination is set, configure how to output decoded data, i.e. the "format"
to present decoded data.
Setting
Auto Enter
Auto Enter
character
Display Code Type
Display Code
Length
Prefix
Suffix
Field Delimiter
Barcode charset
Clear Previous
Data
Description
Adds an ENTER character before or after each string
of decoded data. The ENTER character can be defined
in the "Auto Enter character" field below. This
function saves the trouble of pressing a confirmation
key to accept each string of decoded data. Options
are:
 Disable
 Decoded data + Enter char
 Enter char + Decoded data
Adds a key code before or after the decoded data. If
[Auto Enter] is enabled, select the ENTER character
to send. Options are:
 None
 Carriage Return
 Tab
 Space

Comma
 Semicolon
Prefixes the output data with code type information.
Suffixes the output
information.
Affixes 0 to 10 characters to the left of the output
data. Tap the label to open a character table for
entering the prefix.

Prefixes containing
supported.
Affixes 0 to 10 characters to the right of the output
data. Tap the label to open a character table for
entering the suffix.

Suffixes containing
supported.
Sets the delimiter to separate the output barcode
data to the following pieces: code type, decoded
barcode data, and code length (if applicable). Options
are:
 None
 Comma

Semicolon
 Full stop
Specifies the current decoding for barcode data.
By enabling this option, only the last scanned data
entry will be output.
data with code
invisible characters
invisible characters
146
Default
Decoded data + Enter
char
Carriage Return
Deselected
(Disabled)
length Deselected
(Disabled)
--
are
--
are
None
Windows-1252:Western
European
Deselected
(Disabled)