CipherLab RS31 Reference Manual page 126

RS31 Mobile Computer
PAIR WITH NFC ENABLED BLUETOOTH DEVICES
On the device you would like to pair with, make sure NFC is enabled and Bluetooth
1)
discovery is enabled.
2) Hold the mobile computer without covering the antenna area at the lower end of the
battery cover.
3) Move the mobile computer in proximity with the device. A screen notification will appear
to indicate that pairing is successful.
SHARE INFORMATION
1) Open the web page, video, photo or contact info page you would like to transfer.
Place the back of the mobile computer in close proximity with the other device you would
2)
like to share data with.
When the two devices connect, a "Touch to beam" notification will appear on the
3)
screen.
Touch the screen to initiate data transfer.
4)
Note:
Once the data begins to transfer, the two devices only need to be held within a 10 m (32.8
ft.) range; they no longer have to be held within close range in order to transfer
successfully.
COMMUNICATION WITH NFC
On the mobile computer, launch an NFC enabled application.
1)
Hold the mobile computer without covering the antenna area at the lower end of the
2)
battery cover.
Place the mobile computer close to the NFC tag or device until the application indicates
3)
data transfer is complete.
126