Installing Sim Card, Sam Card And Memory Card - CipherLab RS31 Reference Manual

RS31 Mobile Computer

1.1.2. INSTALLING SIM CARD, SAM CARD AND MEMORY CARD

The RS31 mobile computer is equipped with two SIM card slots, one SAM card slot and one
memory card slot.
To insert the cards:
1) Remove the battery cover as described in
2) Insert the cards into their respective slots according to the directions indicated. Push the
cards to lock them in. Please note that when you insert the cards into their slots, the
metal contact sides of SD card and SIM1 card should be facing downwards, while those
of SIM2 card and SAM card should be facing upwards.
Micro SD Card Slot
▲
Supports SD/SDHC/SDXC
SD
▲
SAM Card Slot
SAM
Replace the battery cover and push the battery lock back to the "Lock" position.
3)
Note:
Both SIM1 and SIM2 card slots support 2G/3G/4G cards. However, you can have 3G/4G
data transmission on either SIM but not on both at the same time. Refer to
Management for details on managing dual SIM cards.
REMOVE CARDS
Remove the battery cover as described in
1)
2) Push the SIM cards and the SAM card to eject them from their slots; take out the SD
directly from it slot.
3) Replace the battery cover and push the battery lock back to the "Lock" position.
Remove Battery.
SIM 1 Slot
Supports 2G/3G/4G Card
SIM 2 Slot
Supports 2G/3G/4G Card
Remove Battery.
26
▲
SIM1
▲
SIM2
SIM Card