CipherLab RS31 Reference Manual page 169

Length option
CODE 93
Code 93
Code 93
Length option
CODE 128
Code 128
Code 128
GS1-128
GS1-128
Separator Character
Enable App ID
Separator
ISBT-128
ISBT 128
Sets the length of the Code 39 symbols to decode.

One Fixed length (Length 1)

Two Fixed lengths (Length 1>Length 2)

Max / Min Length (range: 0-55; Length 1<Length 2)

Any Length
Switch to enable Code 93 decoding.
Sets the length of the Code 93 symbols to decode.

One Fixed length (Length 1)

Two Fixed lengths (Length 1>Length 2)

Max / Min Length (range: 0-55; Length 1<Length 2)

Any Length
Switch to enable Code 128 decoding.

Switch to enable GS1-128 decoding.

Enable the function code character separator, which is used to
separate data fields of variable length and application
identifiers of subsequent data fields in concatenated data
strings. Choose your input method from drop-list: Keyboard
input, Keyboard input (Hexadecimal) or Symbol table
input to set a separator character to replace with.

Check to enable the separator configuration for Application
Identifier.

You can respectively set the Left Separator and Right
Separator. Choose your input method from drop-down list:
Keyboard input, Keyboard input (Hexadecimal) or
Symbol table input to set a separator character to replace
with.
Switch to enable ISBT 128 decoding.
169
Appendix II
Max / Min
Length
(4-55)
Enable
Enable
Max / Min
Length
(4-55)
Enable
Enable
Enable
Enable
None
Enable
Enable