Removing The Lens - Digital Projection E-Vision Important Information Manual

Digital Projection E-Vision Laser 4K Series

Removing the lens

Before changing the lens, always make sure the projector is switched off and fully
disconnected from its power supply.
When changing the lens, avoid using excessive force as this may damage the
equipment.
The lens is shipped separately.
Take care to preserve the original lens packaging and protective caps for future use.
The projector will not power on without the lens fitted.
1. Push in the lens release lever, and turn the lens anti-clockwise.
2. Remove the lens.
Rev A June 2017
Important Information
Page 17