Troubleshooting - Stanley SLB- 3IN1 Original Instructions Manual

G
B

TROUBLESHOOTING

PROBLEMS
Engine fails to start.
Engine hard to start.
Engine lacks power.
Engine overheats.
CAUSES
1. No fuel in tank.
2. Spark plug shorted or fouled.
3. Spark plug is broken.
4. Ignition lead wire shorted, broken, or
disconnected from spark plug.
5. Ignition inoperative.
1. Water in gasoline or stale
fuel mixture.
2. Too much lubricant in fuel mixture.
3. Engine is under or over
choked.
4. Weak spark at spark plug.
Air filter clogged.
Insufficient lubricant in
fuel mixture.
16
ACTION
1. Fill tank.
2. Replace spark plug.
3. Replace spark plug.
4. Replace lead wire or attach to spark
plug.
5. Contact authorized service center.
1. Drain entire system and refill
with fresh fuel.
2. Drain and refill with correct mixture.
3. Adjust choke as necessary.
4. Contact authorized service center.
Clean air filter. Refer to Cleaning
the Air Filter Screen earlier in
this manual.
Mix fuel as described in
starting instructions.