Before Use; Part List - Stanley SLB- 3IN1 Original Instructions Manual

away from spark and/or flameproducing equipment.
3 . Store fuel in containers specifically designed for
this purpose.
4 . Only refuel outdoors and do not smoke while
refueling.
5 . Add fuel before starting the engine. Never
remove the cap of the fuel tank or add fuel while
the engine is running or when the engine is hot.
6 . Do not smoke while handling fuel.
7 . Loosen fuel cap slowly to release pressure and
to keep fuel from escaping around the cap.
8 . Tighten the fuel cap securely after refueling.
9 . Wipe spilled fuel from the unit. Move 30 feet
away from refueling site before starting engine.
10 . Never attempt to burn off spilled fuel under any
circum stances.
11 . To reduce the risk of fire and burn injury, handle
fuel with care. It is highly flammable.
12 . If fuel is spilled, do not attempt to start the
engine but move the machine away from the area
of spillage and avoid creating any source of ignition
until fuel vapors have dissipated.
13 . Replace all fuel tank and container caps
securely.
14 . Empty fuel tank into a container approved for
gasoline and restrain the unit from moving before
transporting in a vehicle.
15 . When draining the fuel tank, use an approved
fuel storage container in a wellventilated area.
16 . Select bare ground, stop engine, and allow to
cool before refueling.
17 . Save these instructions. Refer to them
frequently and use them to instruct others who may
use this tool. If you loan someone this tool, loan
them these instructions also.
18 . Mix and store fuel in a container approved for
petrol. Mix fuel outdoors where there are no sparks
or flames.
19. This product is noisy, to prevent long term
hearing damage, wear hearing protection and keep
other persons 15m away from the working area.
Using hearing protection reduces the ability to hear
warnings (shouts or alarms). The operator must
pay high attention when working with the unit.

BEFORE USE

UNPACKING
WARNING: Before using the product, familiarise
yourself with the operating features read the entire
instruction manual paying particular attention to
the safety rules and operating
1. Unpack all parts and lay them on a flat, stable
surface.
2. Remove all packing materials and shipping
devices if applicable.
3. Make sure the delivery contents are complete
and free of any damage. If you find that parts are
missing or show damage do not use the product
but contact your dealer. Using an incomplete or
damaged product represents a hazard to people
and property.
4. Ensure that you have all the accessories and
tools needed for assembly and operation. This also
includes proper personal protective equipment.
5. Disconnect the spark plug connector from the
spark plug, see chapter "MAINTENANCE AND
CLEANING".

PART LIST

1a. Ignition switch 1 (ON/OFF switch for Blow
mode)
1b. Ignition switch 2 (ON/OFF switch for Vacuum
mode)
2. Throttle trigger
3. Starter handle
4. Vacuum grip handle
5. Fuel tank cap
6. Fuel tank
7. Primer bulb
8. Choke lever
9. Air filter cap
9a. Air filter sponge
10. Bedplate
11. Spark plug
12. Blower tube
13. Upper vacuum tube
14. Lower vacuum tube
15. Collection bag
16. Elbow tube
9
G
B