Hide thumbs Also See for WAFER-BT:
Table of Contents

Advertisement

Quick Links

WAFER-BT
WAFER-BT CPU Card
MODEL:
WAFER-BT
3.5" S BC with In te l® 22n m Ato m ™/Ce le ro n ® o n -b o a rd S o C,
VGA/LVDS /iDP, Du a l P CIe Gb E, US B 3.0, P CIe Min i,
S ATA 3Gb /s , m S ATA, COM, Au d io a n d Ro HS
Us e r Ma n u a l
Page I
Re v. 1.01 - 4 De c e m b e r, 2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WAFER-BT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for IEI Technology WAFER-BT

  • Page 1 WAFER-BT WAFER-BT CPU Card MODEL: WAFER-BT 3.5” S BC with In te l® 22n m Ato m ™/Ce le ro n ® o n -b o a rd S o C, VGA/LVDS /iDP, Du a l P CIe Gb E, US B 3.0, P CIe Min i,...
  • Page 2 WAFER-BT Re vis io n Date Version Changes 4 December, 2014 1.01 Update Section 3.2.23: USB connectors pinouts 7 July, 2014 1.00 Initial release Page II...
  • Page 3 WAFER-BT Co p yrig h t COP YRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer.
  • Page 4: Table Of Contents

    PTIONAL TEMS 3 CONNECTORS ......................14 3.1 P ..............15 ERIPHERAL NTERFACE ONNECTORS 3.1.1 WAFER-BT Layout ................... 15 3.1.2 Peripheral Interface Connectors ..............15 3.1.3 External Interface Panel Connectors ............... 17 3.2 I ..............17 NTERNAL ERIPHERAL ONNECTORS 3.2.1 +12V DC-IN Power Connector ............... 17 3.2.2 Audio Connector ....................
  • Page 5 WAFER-BT 3.2.11 Keyboard and Mouse Connector ..............25 3.2.12 LVDS Backlight Inverter Connector .............. 26 3.2.13 LVDS LCD Connector ................... 27 3.2.14 LAN LED Connector ..................28 3.2.15 PCIe Mini Card Slot ..................29 3.2.16 Power Button Connector ................30 3.2.17 Reset Button Connector .................
  • Page 6 WAFER-BT 4.6.2 Serial Device Connection ................55 4.6.3 USB Connection ....................55 4.6.4 VGA Monitor Connection ................56 5 BIOS ..........................58 5.1 I ......................59 NTRODUCTION 5.1.1 Starting Setup ....................59 5.1.2 Using Setup ...................... 59 5.1.3 Getting Help ..................... 60 5.1.4 Unable to Reboot after Configuration Changes ..........
  • Page 7 WAFER-BT C HAZARDOUS MATERIALS DISCLOSURE ............99 C.1 H IPB P AZARDOUS ATERIAL ISCLOSURE ABLE FOR RODUCTS ERTIFIED AS HS C 2002/95/EC W ........100 OMPLIANT NDER ITHOUT ERCURY Page VII...
  • Page 8 WAFER-BT Lis t o f Fig u re s Figure 1-1: WAFER-BT ........................2 Figure 1-2: Connectors ........................4 Figure 1-3: Dimensions (mm) ......................5 Figure 1-4: Data Flow Diagram ...................... 6 Figure 3-1: Connector and Jumper Locations (Front) ..............15 Figure 3-2: +12V DC-IN Power Connector Location ..............18...
  • Page 9 WAFER-BT Figure 3-28: VGA Connector .......................39 Figure 4-1: SO-DIMM Installation ....................44 Figure 4-2: AT/ATX Mode Select Switch Location ..............46 Figure 4-3: Clear CMOS Button Location ...................46 Figure 4-4: LVDS Panel Resolution Selection Switch Location ..........48 Figure 4-5: LVDS Voltage Selection Jumper Location .............49 Figure 4-6: Flash Descriptor Security Override Jumper Location ..........50...
  • Page 10 WAFER-BT Lis t o f Ta b le s Table 1-1: WAFER-BT Model Variations ..................2 Table 1-2: Technical Specifications ....................9 Table 3-1: Peripheral Interface Connectors ................16 Table 3-2: Rear Panel Connectors ....................17 Table 3-3: +12V DC-IN Power Connector Pinouts ..............18 Table 3-4: Audio Connector Pinouts ..................19...
  • Page 11 WAFER-BT Table 4-2: Clear CMOS Button Settings ..................46 Table 4-3: LVDS Panel Resolution Selection ................47 Table 4-4: LVDS Voltage Selection Jumper Settings ..............48 Table 4-5: Flash Descriptor Security Override Jumper Settings ..........49 Table 5-1: BIOS Navigation Keys ....................60 Page XI...
  • Page 12 WAFER-BT Lis t o f BIOS Me n u s BIOS Menu 1: Main ........................61 BIOS Menu 2: Advanced ......................62 BIOS Menu 3: ACPI Configuration ....................63 BIOS Menu 4: Super IO Configuration ..................64 BIOS Menu 5: Serial Port n Configuration Menu ...............64 BIOS Menu 6: Hardware Monitor ....................69...
  • Page 13: Introduction

    WAFER-BT Chapter In tro d u c tio n P a g e 1...
  • Page 14: Introduction

    8GB (J1900, N2930, E3845, E3827, E3826) or 4GB (N2807, E3825, E3815). The WAFER-BT includes a VGA connector, a LVDS connector and an iDP connector. Expansion and I/O include one USB 2.0 connector and one USB 3.0 connector on the rear panel, four USB 2.0 connectors by pin header and two SATA 3Gb/s connectors.
  • Page 15: Features

    WAFER-BT 1.3 Fe a tu re s Some of the WAFER-BT motherboard features are listed below:  3.5" SBC supports Intel® 22nm Atom™/Celeron® on-board SoC  Dual independent display support  One 204-pin 1066/1333 MHz single-channel DDR3L SO-DIMM supports up to 8GB (J1900, N2930, E3845, E3827, E3826) or 4GB (N2807, E3825, E3815) ...
  • Page 16: Connectors

    WAFER-BT 1.4 Co n n e c to rs The connectors on the WAFER-BT are shown in the figure below. Figure 1-2: Connectors P a g e 4...
  • Page 17: Dimensions

    WAFER-BT 1.5 Dim e n s io n s The dimensions of the board are listed below: Figure 1-3: Dimensions (mm) P a g e 5...
  • Page 18: Data Flow

    WAFER-BT 1.6 Da ta Flow Figure 1-4 shows the data flow between the system chipset, the CPU and other components installed on the motherboard. Figure 1-4: Data Flow Diagram P a g e 6...
  • Page 19: Technical Specifications

    WAFER-BT 1.7 Te c h n ic a l Sp e c ific a tio n s WAFER-BT technical specifications are listed below. S p e c ific a tio n WAFER-BT S o C Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core, 2MB cache, TDP=10W) Intel®...
  • Page 20 WAFER-BT S p e c ific a tio n WAFER-BT Eth e rn e t 1 x PCIe GbE by Intel I210 controller (LAN1) 1 x PCIe GbE by Intel I211 controller (LAN2) S u p e r IO Fintek F81866...
  • Page 21: Table 1-2: Technical Specifications

    WAFER-BT S p e c ific a tio n WAFER-BT S e ria l ATA 2 x SATA 3Gb/s with 5V SATA power connector (no RAID) En viro n m e n ta l a n d P o we r S p e c ific a tio n s...
  • Page 22: Unpacking

    WAFER-BT Chapter Un p a c kin g P a g e 10...
  • Page 23: Anti Static Precautions

    Only handle the edges of the PCB: Don't touch the surface of the motherboard. Hold the motherboard by the edges when handling. 2.2 Un pa c kin g P re c a u tio n s When the WAFER-BT is unpacked, please do the following:  Follow the antistatic guidelines above.
  • Page 24: Packing List

    If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the WAFER-BT was purchased from or contact an IEI sales representative directly by sending an email to sales@iei.com.tw.
  • Page 25: Optional Items

    WAFER-BT Utility CD One Key Recovery CD Quick Installation Guide 2.4 Op tio n a l Ite m s The following are optional components which may be separately purchased: Ite m a n d P a rt Nu m b e r...
  • Page 26: Connectors

    WAFER-BT Chapter Co n n e c to rs P a g e 14...
  • Page 27: Peripheral Interface Connectors

    3.1 P e rip h e ra l In te rfa c e Co n n e c to rs This chapter details all the jumpers and connectors. 3.1.1 WAFER-BT La yo u t The figures below show all the connectors and jumpers.
  • Page 28: Table 3-1: Peripheral Interface Connectors

    WAFER-BT Battery connector 2-pin wafer BAT1 Buzzer connector 2-pin wafer CPU fan connector 4-pin wafer CPU_FAN1 System fan connector 4-pin wafer SYS_FAN1 DDR3L SO-DIMM slot DDR3L SO-DIMM slot DIMM1 Digital I/O connector 10-pin header DIO1 Display port connector 20-pin header...
  • Page 29: External Interface Panel Connectors

    3.2 In te rn a l P e rip h e ra l Co n n e c to rs The section describes all of the connectors on the WAFER-BT. 3.2.1 +12V DC-IN P owe r Co n n e c to r...
  • Page 30: Audio Connector

    WAFER-BT Figure 3-2: +12V DC-IN Power Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION +12V +12V Table 3-3: +12V DC-IN Power Connector Pinouts 3.2.2 Au d io Co n n e c to r CN La b e l: AUDIO1...
  • Page 31: Battery Connector

    WAFER-BT Figure 3-3: Audio Connector Location P IN NO. DES CRIP TION P IN NO. DES CRIP TION LINE_OUTR LINEIN_R Analog_GND Analog_GND LINE_OUTL LINEIN_L Analog_GND Analog_GND LMIC1-R LMIC1-L Table 3-4: Audio Connector Pinouts 3.2.3 Ba tte ry Co n n e c to r...
  • Page 32: Buzzer Connector

    WAFER-BT Figure 3-4: Battery Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION VBATT Table 3-5: Battery Connector Pinouts 3.2.4 Bu zze r Co n n e c to r CN La b e l: CN Typ e : 2-pin wafer...
  • Page 33: Cpu Fan Connector

    WAFER-BT PIN NO. DESCRIPTION PIN NO. DESCRIPTION Buzzer + Buzzer - Table 3-6: Buzzer Connector Pinouts 3.2.5 CP U Fa n Co n n e c to r CN La b e l: CP U_FAN1 CN Typ e : 4-pin wafer...
  • Page 34: Figure 3-7: Ddr3L So-Dimm Slot Location

    WAFER-BT Figure 3-7: DDR3L SO-DIMM Slot Location 3.2.7 Dig ita l I/O Co n n e c to r CN La b e l: DIO1 CN Typ e : 10-pin header See Figure 3-8 CN Lo c a tio n :...
  • Page 35: Display Port Connector

    WAFER-BT PIN NO. DESCRIPTION PIN NO. DESCRIPTION DGPO3 DGPO2 DGPO1 DGPO0 DGPI3 DGPI2 DGPI1 DGPI0 Table 3-8: Digital I/O Connector Pinouts 3.2.8 Dis p la y P o rt Co n n e c to r CN La b e l:...
  • Page 36: Front Panel Connector

    WAFER-BT Description Description DDI1_HPD# DPD_AUX_CTRL_P2 DPD_AUX_CTRL_N2 DPD_OB_LANE2_P DPD_OB_LANE2_N DPD_OB_LANE0_P DPD_OB_LANE0_N +3.3V Table 3-9: Display Port Connector Pinouts 3.2.9 Fro n t P a n e l Co n n e c to r CN La b e l: CN Typ e :...
  • Page 37: Iris-1010 Module Slot

    2.0 module. DO NOT install other modules into the iRIS-1010 module slot. Doing so may cause damage to the WAFER-BT. 3.2.11 Ke yb o a rd a n d Mo u s e Co n n e c to r...
  • Page 38: Lvds Backlight Inverter Connector

    WAFER-BT See Table 3-11 CN P in o u ts : The keyboard/mouse connector connects to a PS/2 Y-cable that can be connected to a PS/2 keyboard and mouse. Figure 3-12: Keyboard and Mouse Location Description Mouse Data Mouse Clock...
  • Page 39: Lvds Lcd Connector

    WAFER-BT Figure 3-13: Backlight Inverter Connector Location Description BRIGHTNESS2 ENABKL2 Table 3-12: Backlight Inverter Connector Pinouts 3.2.13 LVDS LCD Co n n e c to r CN La b e l: LVDS 1 30-pin crimp CN Typ e : CN Lo c a tio n :...
  • Page 40: Lan Led Connector

    WAFER-BT Figure 3-14: LVDS Connector Location Description Description LVDSB_DATA0# LVDSB_DATA1 LVDSA_DATA0 LVDSBDATA1# LVDSA_DATA0# LVDSB_DATA2 LVDSA_DATA1 LVDSB_DATA2# LVDSA_DATA1# LVDSB_CLK LVDSA_DATA2 LVDSB_CLK# LVDSA_DATA2# LVDSB_DATA3 LVDSA_CLK LVDSB_DATA3# LVDSA_CLK# LVDSA_DATA3 LVDSA_DATA3# +3.3V +3.3V +3.3V LVDSB_DATA0 +3.3V Table 3-13: LVDS Connector Pinouts 3.2.14 LAN LED Co n n e c to r...
  • Page 41: Pcie Mini Card Slot

    WAFER-BT 2-pin header CN Typ e : See Figure 3-15 CN Lo c a tio n : See Table 3-14 CN P in o u ts : The LAN LED connectors connect to the LAN link LEDs on the system.
  • Page 42: Power Button Connector

    WAFER-BT Figure 3-16: PCIe Mini Card Slot Location 3.2.16 P owe r Bu tto n Co n n e c to r CN La b e l: P WR_BTN1 2-pin wafer CN Typ e : See Figure 3-17 CN Lo c a tio n :...
  • Page 43: Reset Button Connector

    WAFER-BT Table 3-15: Power Button Connector Pinouts 3.2.17 Re s e t Bu tto n Co n n e c to r CN La b e l: RS T_BTN1 2-pin wafer CN Typ e : See Figure 3-18 CN Lo c a tio n :...
  • Page 44: Rs-422/485 Serial Port Connector

    WAFER-BT The serial connector provides RS-232 connection. Figure 3-19: RS-232 Serial Port Connectors Locations PIN NO. DESCRIPTION PIN NO. DESCRIPTION NDCD NDSR NRXD NRTS NTXD NCTS NDTR Table 3-17: RS-232 Serial Port Connector Pinouts 3.2.19 RS -422/485 S e ria l P ort Co n n e c to r...
  • Page 45: Sata 3Gb/S Drive Connector

    WAFER-BT Figure 3-20: RS-422/485 Connector Location Description Description RXD485# RXD485+ TXD485+ TXD485# Table 3-18: RS-422/485 Connector Pinouts Use the optional RS-422/485 cable to connect to a serial device. The pinouts of the DB-9 connector are listed below. RS-422 Pinouts RS-485 Pinouts Table 3-19: DB-9 RS-422/485 Pinouts 3.2.20 S ATA 3Gb /s Drive Co n n e c to r...
  • Page 46: Sata Power Connector

    WAFER-BT The SATA 3Gb/s drive connector is connected to a SATA 3Gb/s drive. The SATA 3Gb/s drive transfers data at speeds as high as 3Gb/s. Figure 3-21: SATA 3Gb/s Drive Connectors Locations 3.2.21 S ATA P o we r Co n n e c to r...
  • Page 47: Smbus Connector

    WAFER-BT PIN NO. DESCRIPTION Table 3-20: SATA Power Connector Pinouts 3.2.22 S MBUS Co n n e c to r CN La b e l: 4-pin wafer CN Typ e : CN Lo c a tio n : See Figure 3-23...
  • Page 48: External Peripheral Interface Connector Panel

    3.3 Exte rn a l P e rip h e ra l In te rfa c e Co n n e c to r P a n e l Figure 3-25 shows the WAFER-BT external peripheral interface connector (EPIC) panel.
  • Page 49: Lan Connector

    WAFER-BT Figure 3-25: External Peripheral Interface Connector 3.3.1 LAN Co n n e c to r CN La b e l: LAN1, LAN2 RJ-45 CN Typ e : See Figure 3-25 CN Lo c a tio n : CN P in o u ts : See Figure 3-26 and Table 3-23 The LAN connector connects to a local network.
  • Page 50: Usb Connectors

    CN P in o u ts : The WAFER-BT has one external USB 2.0 port and one external USB 3.0 port. The USB connector can be connected to a USB device. The pinouts of USB 2.0 port & USB 3.0 connectors are shown below.
  • Page 51: Vga Connector

    WAFER-BT CN Location: See Figure 3-25 CN Pinouts: See Figure 3-27 and Table 3-27 The serial port connects to a RS-232 serial communications device. Figure 3-27: RS-232 Serial Port Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION NDCD1# NDSR1# NRXD1 NRTS1#...
  • Page 52: Table 3-28: Vga Connector Pinouts

    WAFER-BT DESCRIPTION DESCRIPTION Green Blue VGAVCC HOTPLUG DDCDAT HSYNC VSYNC DDCCLK Table 3-28: VGA Connector Pinouts P a g e 40...
  • Page 53: Installation

    WAFER-BT Chapter In s ta lla tio n P a g e 41...
  • Page 54: Anti - Static Precautions

    Electrostatic discharge (ESD) can cause serious damage to electronic components, including the WAFER-BT. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the WAFER-BT or any other electrical component is handled, the following anti-static precautions are strictly adhered to.
  • Page 55  Turn all power to the WAFER-BT off: When working with the WAFER-BT, make sure that it is disconnected from all power supplies and that no electricity is being fed into the system. Before and during the installation of the WAFER-BT DO NOT: ...
  • Page 56: So-Dimm Installation

    4.3 S O-DIMM In s ta lla tio n WARNING: Using incorrectly specified SO-DIMM may cause permanently damage the WAFER-BT. Please make sure the purchased SO-DIMM complies with the memory specifications of the WAFER-BT. SO-DIMM specifications compliant with the WAFER-BT are listed in the specification table of Chapter 1.
  • Page 57: System Configuration

    WAFER-BT 4.4 S ys te m Co n fig u ra tio n The system configuration is controlled by buttons, jumpers and switches. The system configuration should be performed before installation. 4.4.1 AT/ATX Mo d e S e le c t S witc h...
  • Page 58: Clear Cmos Button

    CN S e ttin g s : See Table 4-2 If the WAFER-BT fails to boot due to improper BIOS settings, use the button to clear the CMOS data and reset the system BIOS information. The clear CMOS button settings are shown in Table 4-2.
  • Page 59: Table 4-3: Lvds Panel Resolution Selection

    WAFER-BT J u m p e r S e ttin g s : See Table 4-3 J u m p e r Lo c a tio n : See Figure 4-4 Selects the resolution of the LCD panel connected to the LVDS connector.
  • Page 60: Lvds Voltage Selection

    4.4.4 LVDS Vo lta g e S e le c tio n WARNING: Permanent damage to the screen and WAFER-BT may occur if the wrong voltage is selected with this jumper. Please refer to the user guide that came with the monitor to select the correct voltage.
  • Page 61: Flash Descriptor Security Override Jumper

    WAFER-BT Figure 4-5: LVDS Voltage Selection Jumper Location 4.4.5 Fla s h De s c rip to r S e c u rity Ove rrid e J u m p e r J u m p e r La b e l:...
  • Page 62: Internal Peripheral Device Connections

    4.5.1 Au d io Kit In s ta lla tio n The Audio Kit that came with the WAFER-BT connects to the audio connector on the WAFER-BT. The audio kit consists of three audio jacks. Mic-in connects to a microphone.
  • Page 63: Sata Drive Connection

    0: 4.5.2 S ATA Drive Co n n e c tio n The WAFER-BT is shipped with a SATA drive cable. To connect the SATA drive to the connector, please follow the steps below. S te p 1: Locate the SATA connector and the SATA power connector.
  • Page 64: Single Rs-232 Cable

    WAFER-BT Figure 4-8: SATA Drive Cable Connection Connect the cable to the SATA disk. Connect the connector on the other end S te p 3: of the cable to the connector at the back of the SATA drive. See Figure 4-8.
  • Page 65: External Peripheral Interface Connection

    WAFER-BT Insert the cable connector. Insert the connector into the serial port box header. S te p 2: See Figure 4-9. A key on the front of the cable connectors ensures the connector can only be installed in one direction.
  • Page 66: Lan Connection

    WAFER-BT To install these devices, connect the corresponding cable connector from the actual device to the corresponding WAFER-BT external peripheral interface connector making sure the pins are properly aligned. 4.6.1 LAN Co n n e c tio n There is one external RJ-45 LAN connector on the external peripheral interface panel. The RJ-45 connector enables connection to an external network.
  • Page 67: Serial Device Connection

    4.6.3 US B Co n n e c tio n The external USB Series "A" receptacle connectors provide easier and quicker access to external USB devices. Follow the steps below to connect USB devices to the WAFER-BT. P a g e 55...
  • Page 68: Vga Monitor Connection

    4.6.4 VGA Mo n ito r Co n n e c tio n The WAFER-BT has a single female DB-15 connector on the external peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor to the WAFER-BT, please follow the instructions below.
  • Page 69: Figure 4-13: Vga Connector

    Insert the VGA connector. Once the connectors are properly aligned with the S te p 3: insert the male connector from the VGA screen into the female connector on the WAFER-BT. See Figure 4-13. Figure 4-13: VGA Connector Secure the connector. Secure the DB-15 VGA connector from the VGA...
  • Page 70: Bios

    WAFER-BT Chapter BIOS P a g e 58...
  • Page 71: Introduction

    WAFER-BT 5.1 In tro d u c tio n The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. NOTE: Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice.
  • Page 72: Getting Help

    WAFER-BT Ke y Fu n c tio n Decrease the numeric value or make changes F1 key General help, only for Status Page Setup Menu and Option Page Setup Menu F2 key Load previous values. F3 key Load optimized defaults...
  • Page 73: Main

    WAFER-BT The following sections completely describe the configuration options found in the menu items at the top of the BIOS screen and listed above. 5.2 Ma in The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered.
  • Page 74: Advanced

    WAFER-BT  S ys te m Da te [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year.  S ys te m Tim e [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds.
  • Page 75: Acpi Settings

    WAFER-BT 5.3.1 ACP I S e ttin g s The ACPI Settings menu (BIOS Menu 3) configures the Advanced Configuration and Power Interface (ACPI) options. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced ACPI Settings ACPI Sleep State...
  • Page 76: Super Io Configuration

    WAFER-BT 5.3.2 S u pe r IO Co n fig u ra tio n Use the Super IO Configuration menu (BIOS Menu 4) to set or change the configurations for the serial ports. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc.
  • Page 77 WAFER-BT 5.3.2.1.1 S e ria l P o rt 1 Co n fig u ra tio n  S e ria l P o rt [En a b le d ] Use the Serial Port option to enable or disable the serial port.
  • Page 78 WAFER-BT  Enable the serial port Enabled EFAULT  Ch a n g e S e ttin g s [Au to ] Use the Change Settings option to change the serial port IO port address and interrupt address.  Auto...
  • Page 79 WAFER-BT  The serial port IO port address and interrupt Auto EFAULT address are automatically detected.  IO=3E8h; IRQ=7 Serial Port I/O port address is 3E8h and the interrupt address is IRQ7  IO=3F8h; IRQ=3, Serial Port I/O port address is 3F8h and the...
  • Page 80: Hardware Monitor

    WAFER-BT  Serial Port I/O port address is 2E8h and the IO=2E8h; IRQ=7 interrupt address is IRQ7  IO=3F8h; IRQ=3, Serial Port I/O port address is 3F8h and the interrupt address is IRQ3,4,5,6,7,9,10,11,12 4,5,6,7,9,10,11,12  IO=2F8h; IRQ=3, Serial Port I/O port address is 2F8h and the...
  • Page 81: Smart Fan Mode Configuration

    WAFER-BT Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced PC Health Status Enable or Disable Smart > Smart Fan Function CPU temperature :+57 C System temperature :+42 C CPU Fan Speed :N/A SYS Fan Speed :N/A --------------------- : Select Screen...
  • Page 82: Bios Menu 7: Smart Fan Mode Configuration

    WAFER-BT Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced Smart Fan Mode Configuration CPU Smart Fan control settings. CPU Smart Fan control [Auto PWM Mode] Temperature of Off Temperature of Start Start PWM --------------------- : Select Screen Slope(Duty Cycle) ↑...
  • Page 83 WAFER-BT the CPU is at a very high temperature and therefore cause the system to be damaged. The Temperature of Off option can only be set if the CPU Smart Fan control option is set to Auto Mode. If the CPU temperature is lower than Temperature of Off, the fan speed change to be lowest.
  • Page 84: Rtc Wake Settings

    WAFER-BT  Minimum Value: 0  Maximum Value: 100  S lo p e (Du ty Cyc le ) [4] The Slope (Duty Cycle) option can only be set if the CPU Smart Fan control option is set to Auto Mode. Use the Slope (Duty Cycle) option to select the linear rate at which the PWM mode increases with respect to an increase in temperature.
  • Page 85: Serial Port Console Redirection

    WAFER-BT  Wa ke s ys te m with Fixe d Tim e [Dis a b le d ] Use the Wake system with Fixed Time option to enable or disable the system wake on alarm event.  The real time clock (RTC) cannot generate a wake...
  • Page 86: Console Redirection Settings

    WAFER-BT Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced COM1 Console Redirection Console Redirection [Disabled] Enable or Disable > Console Redirection Settings --------------------- : Select Screen COM2 ↑ ↓: Select Item Console Redirection [Disabled] > Console Redirection Settings...
  • Page 87: Bios Menu 10: Console Redirection Settings

    WAFER-BT Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced COM1 Emulation: ANSI: Console Redirection Settings Extended ASCII char set. VT100: ASCII char set. Terminal Type [ANSI] VT100+: Extends VT100 to Bits per second [115200] support color, function Data Bits keys, etc.
  • Page 88 WAFER-BT  Sets the serial port transmission speed at 38400. 38400  57600 Sets the serial port transmission speed at 57600.  115200 Sets the serial port transmission speed at 115200. EFAULT  Da ta Bits [8] Use the Data Bits option to specify the number of data bits.
  • Page 89: Cpu Configuration

    WAFER-BT 5.3.6 CP U Co n fig u ra tio n Use the CPU Configuration menu (BIOS Menu 5) to view detailed CPU specifications and configure the CPU. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced CPU Configuration...
  • Page 90: Ide Configuration

    WAFER-BT  Disables the Intel Speed Step Technology. Disabled  Enabled Enables the Intel Speed Step Technology. EFAULT 5.3.7 IDE Co n fig u ra tio n Use the IDE Configuration menu (BIOS Menu 12) to change and/or set the configuration of the SATA devices installed in the system.
  • Page 91: Usb Configuration

    WAFER-BT  S ATA P o rt 1/0 Ho tP lu g [Dis a b le d ] Use the Serial-ATA Port 1/0 HotPlug option to enable or disable the SATA device hot plug.  Disables the SATA device hot plug.
  • Page 92: Chipset

    WAFER-BT  Le g a c y US B S u p p o rt [En a b le d ] Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support. Normally if this option is not enabled, any attached USB mouse or USB keyboard does not become available until a USB compatible operating system is fully booted with all USB drivers loaded.
  • Page 93: North Bridge Configuration

    WAFER-BT Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit > North Bridge North Bridge Parameters > South Bridge --------------------- : Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
  • Page 94: Intel Igd Configuration

    WAFER-BT  Me m o ry In fo rm a tio n The Memory Information lists a brief summary of the on-board memory. The fields in Memory Information cannot be changed. 5.4.1.1 In te l IGD Co n fig u ra tio n Use the Intel IGD Configuration menu (BIOS Menu 16) to configure the video device connected to the system.
  • Page 95: Southbridge Configuration

    WAFER-BT  DVMT To ta l Gfx Me m [MAX] Use the DVMT Total Gfx Mem option to select DVMT5.0 total graphic memory size used by the internal graphic device. The following options are available:  128M  256M ...
  • Page 96: Bios Menu 17: Southbridge Chipset Configuration

    WAFER-BT Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Chipset Auto Power Button Status [Disabled(ATX)] EUP Disable/Enable. Restore AC Power Loss [Last State] > PCI Express Configuration --------------------- : Select Screen Audio Configuration ↑ ↓: Select Item Audio Controller...
  • Page 97: Pci Express Configuration

    WAFER-BT 5.4.2.1 P CI Exp re s s Co n fig u ra tio n Use the PCI Express Configuration menu (BIOS Menu 17) to configure the PCI Express. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced...
  • Page 98: Security

    WAFER-BT 5.5 S e c u rity Use the Security menu (BIOS Menu 19) to set system and user passwords. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Password Description...
  • Page 99: Boot

    WAFER-BT 5.6 Bo o t Use the Boot menu (BIOS Menu 17) to configure system boot options. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Boot Configuration Select the keyboard...
  • Page 100 WAFER-BT  Qu ie t Bo o t [En a b le d ] Use the Quiet Boot BIOS option to select the screen display when the system boots.  Normal POST messages displayed Disabled  Enabled OEM Logo displayed instead of POST messages EFAULT ...
  • Page 101: Exit

    WAFER-BT  Bo o t Op tio n P rio rity Use the Boot Option Priority function to set the system boot sequence from the available devices. The drive sequence also depends on the boot sequence in the individual device section.
  • Page 102 WAFER-BT  Re s to re De fa u lts Use the Restore Defaults option to load the optimal default values for each of the parameters on the Setup menus. F3 key can be used for this operation.  S a ve a s Us e r De fa u lts Use the Save as User Defaults option to save the changes done so far as user defaults.
  • Page 103: A Bios Menu Options

    WAFER-BT Ap p e n d ix BIOS Me n u Op tio n s P a g e 91...
  • Page 104 WAFER-BT  System Date [xx/xx/xx] ......................62  System Time [xx:xx:xx] .......................62  ACPI Sleep State [S3 only (Suspend to RAM)] ..............63  Serial Port [Enabled] ......................65  Change Settings [Auto] .......................65  Serial Port [Enabled] ......................65  Change Settings [Auto] .......................66 ...
  • Page 105 WAFER-BT  Primary IGFX Boot Display [VBIOS Default] ..............83  Restore on AC Power Loss [Last State] ................84  Audio Controller [Enabled] ....................84  PCI Express Port [Enabled] ....................85  Speed [Auto] .........................85  Administrator Password .....................86  User Password ........................86 ...
  • Page 106: B Terminology

    WAFER-BT Ap p e n d ix Te rm in o lo g y P a g e 94...
  • Page 107 WAFER-BT AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration and Power Interface (ACPI) is an OS-directed configuration, power management, and thermal management interface. AHCI Advanced Host Controller Interface (AHCI) is a SATA Host controller register-level interface.
  • Page 108 WAFER-BT computer is usually a male DE-9 connector. The Digital-to-Analog Converter (DAC) converts digital signals to analog signals. Double Data Rate refers to a data bus transferring data on both the rising and falling edges of the clock signal. Direct Memory Access (DMA) enables some peripheral devices to bypass the system processor and communicate directly with the system memory.
  • Page 109 WAFER-BT PCIe PCI Express (PCIe) is a communications bus that uses dual data lines for full-duplex (two-way) serial (point-to-point) communications between the SBC components and/or expansion cards and the SBC chipsets. Each line has a 2.5 Gbps data transmission rate and a 250 MBps sustained data transfer rate.
  • Page 110 WAFER-BT USB 2.0 supports 480Mbps data transfer rates. The Video Graphics Array (VGA) is a graphics display system developed by IBM. P a g e 98...
  • Page 111 WAFER-BT Ap p e n d ix Ha za rd o u s Ma te ria ls Dis c lo s u re P a g e 99...
  • Page 112 WAFER-BT C.1 Ha za rd o u s Ma te ria l Dis c lo s ure Ta b le fo r IP B P ro d u c ts Ce rtifie d a s Ro HS Co m p lia n t Un d e r 2002/95/EC With o u t...
  • Page 113 WAFER-BT Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl Ethers (CR(VI)) (PBB) (PBDE) Housing Display Printed Circuit Board Metal Fasteners Cable Assembly Fan Assembly Power Supply Assemblies Battery...
  • Page 114 WAFER-BT 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签,此期限是估算这些物质”不会有泄漏或突变”的 年限。本 产品可能包含有较短的环境友好使用期限的可替换元件,像是电池或灯管,这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。...

Table of Contents