Method 2: Using 6-pin Connector (for KX-TD1232DBX/ML, KX-TDN1232)
Wire Specifications
Diameter of conductor
Diameter including coating
Connection
1. Prepare the required plugs. Sixteen 6-pin plugs are included to connect extension lines.
Note
Do not peel off the wire coating. Insert the wires all the way.
To the main unit
2. Insert the plug into an extension jack in the main unit.
General Installation
Wire
ø 0.4 mm – ø 0.65 mm (22, 24, 26 AWG)
ø 0.66 mm – ø 1.05 mm
P2
D1
T
R
D2
P1
To extensions
(Jacks 01 – 16)
Solid wire
P2
D1
T
From Terminal
R
D2
Equipment
P1
2
1
P2
D1
T
R
D2
P1
Jacks 01 through 16 are
located from bottom to top.
2.3 Connection
Jack 4
Jack 3
Jack 2
Jack 1
51