Panasonic KX-TD816 Installation Manual page 40

2.2 Installation of the Main Unit
Power Supply for KX-TD816BX
Check the Voltage Selector to confirm if it is set to your house hold AC voltage.
If not, reset the Voltage Selector on the back of the main unit to the correct position with a
screwdriver.
Voltage Selector
(110 V – 115 V / 200 V / 220 V / 240 V)
Power Adaptor for KX-TD816BX
The plug adaptor (included) is to be used if the power plug will not fit your socket. Assemble
as shown below, using the plug which fits your socket. In this case, be sure to connect the frame
of the main unit to ground because the ground line in the power cable cannot be used.
Power Plug
40
Plug Adaptor
to Power Outlet
General Installation