Panasonic KX-TD816 Installation Manual page 47

Method 2: Using Modular Connector (KX-TD1232BX/HK/X)
Connection
1.
Insert the modular plugs of the telephone line cords (4-conductor wiring) into the modular
jacks on the system.
2.
Connect the line cord to the terminal board or the Central Office jack.
Use 4-conductor wiring cord
Notice
• Use twisted pair cable for installation.
• Mis-connection may cause the system to operate improperly. See Section
5.1.1 Installation and 5.1.2 Connection.
General Installation
To Terminal Board or Modular
Jacks from the Central Office.
T2 R1 T1 R2
R: Ring
T: Tip
View of TEL Jack (Outside Line)
Outside Line 07,
Outside Line 05,
Outside Line 03,
Outside Line 01,
2.3 Connection
(T1, R1) (T2, R2)
08
06
04
02
47