6.
Insert the coaxial plug of the telephone line cords (2 coaxial cables) into the coaxial jack
(E1 port).
a.
Align the plug with the jack and push in the plug.
b.
Twist the plug until it locks on the connector.
7.
Tie all of the cords into a bundle. If other cords are exposed in the upper cabinets, tie them
also.
8.
Close the cabinet cover and secure the outside screw.
9.
Cover the cords with the cord holder (included).
E1 Installation
To Coaxial Connectors
from Network
Cord holder
4.2 E1 Line Installation
155