2.4 Installation of Optional Cards and Unit
Inserting the Connector
1.
Insert the two 50-pin connectors to the jacks as shown below.
The connector "TO SYSTEM" should be connected to the cable which is connected to the
KX-TD816/KX-TD1232.
Also, the connector "TO EXTN" should be connected to the cable which is connected to the
extensions.
2.
Insert the cables through the binders.
114
Connector ( TO SYSTEM )
To System
To Extensions
Binders
Connector ( TO EXTN )
Connector type
50-pin (Amphenol 57JE
series or the equivalent)
25
1
50
26
General Installation