Operation Of The “Engine Start Stop” Switch; When The “Engine Start Stop” Switch Indicator Flashes In Amber - Toyota Land Cruiser Owner's Manual

■
Operation of the "ENGINE START STOP" switch
When operating the "ENGINE START STOP" switch, one short, firm press is
enough. If the switch is pressed improperly, the engine may not start or the
"ENGINE START STOP" switch mode may not change. It is not necessary to
press and hold the switch.
■
When the steering lock cannot be released
■
If the engine does not start
The engine immobilizer system may not have been deactivated. (→P. 129)
Contact your Toyota dealer.
■
When the "ENGINE START STOP" switch indicator flashes in amber
The system may be malfunctioning. Have the vehicle inspected by your
Toyota dealer immediately.
The green indicator light on the "ENGINE
START STOP" switch will flash and a
message will be shown on the multi-infor-
mation display (if equipped). Press the
"ENGINE START STOP" switch again
while turning the steering wheel left and
right.
2-1. Driving procedures
195
2