4-3. Do-it-yourself maintenance
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
Vehicles without a smart entry & start system: Turn the
STEP
1
engine switch to the "LOCK" position.
Vehicles with a smart entry & start system: Turn the
"ENGINE START STOP" switch OFF.
The fuses are located in the following places. To check the
STEP
2
fuses, follow the instructions below.
Engine compartment
Passenger's side instrument panel
Push the tab in and lift the lid
off.
ITY42C031
Remove
equipped)
ITY42C009
the
cover.
(if
4
459