Vehicle Customization; When Setting Using The Vehicle Switches; When Customizing Using The Touch Screen - Toyota Land Cruiser Owner's Manual

6-2. Customization
* 1
: VDJ200R-GNTEZQ and URJ202R-GNTEKQ only.
The model code is indicated on the manufacturer's label. (→P. 575)
* 2
: The settings can be changed when the mechanical key linked operation of
the power window is set to ON.
*
3
: The settings can be changed when the wireless remote control linked oper-
ation of the power window is set to ON.
* 4
: The settings can be changed when the entry function linked operation of the
power window is set to ON.
* 5
: If equipped
■

Vehicle customization

●
If the Smart entry & start system is turned "OFF", unlock door cannot be
selected.
●
If the doors are not opened after unlocking and are then automatically re-
locked, a signal will be given if "Operation signal (Emergency flashers)"
or "Operation signal (Buzzer)" are set to ON.
■
When setting using the vehicle switches (vehicles with navigation sys-
tem)
When using the vehicle switches to set an item that can also be set using the
touch screen, the item displayed on the touch screen will not change imme-
diately.
If the "ENGINE START STOP" switch is first turned to OFF, the screen dis-
play will change once the "ENGINE START STOP" switch is turned to IGNI-
TION ON mode again.
■
When customizing using the touch screen (vehicles with navigation
system)
Stop the vehicle in a safe place, apply the parking brake, and shift the shift
lever to "P". Also, to prevent battery discharge, leave the engine running
while customizing the features.
600