Switching The Door Unlock Function - Toyota Land Cruiser Owner's Manual

■

Switching the door unlock function

It is possible to set which doors the entry function unlocks.
STEP 1 Turn the "ENGINE START STOP" switch OFF.
STEP 2 When the indicator on the key surface is turned off, press and hold
or
pressing
The setting changes each time an operation is preformed, as shown below.
(When changing the setting continuously, release the buttons, wait for at
least 5 seconds, and repeat
Multi-information
display
To prevent unintended triggering of the alarm, unlock the doors using the
wireless remote control and open and close a door once after the setting
have been changed. (If a door is not opened within 30 seconds after
is pressed, the doors will be locked again and the alarm will automatically be
set.)
In case that the alarm is triggered, immediately stop the alarm.(→P. 131)
1-2. Opening, closing and locking the doors
(if equipped) for approximately 5 seconds while
on the key.
.)
STEP 2
Unlocking function
Hold the driver's door
handle to unlock only
the driver's door.
Hold either door han-
dle to unlock all doors.
Beep
Exterior: Beeps three
times
Interior: Pings once
Exterior: Beeps twice
Interior: Pings once
1
39