Replacing A Flat Tire For Vehicles With Power Back Door - Toyota Land Cruiser Owner's Manual

CAUTION
■
Replacing a flat tire
●
Observe the following precautions.
Failure to do so may result in serious injury:
• Lower the spare tire completely to the ground before removing it from
under the vehicle.
• Do not try to remove the wheel ornament by hand. Take due care in
handling the ornament to avoid unexpected personal injury.
• Do not touch the disc wheels or the area around the brakes immedi-
ately after the vehicle has been driven.
After the vehicle has been driven the disc wheels and the area around
the brakes will be extremely hot. Touching these areas with hands, feet
or other body parts while changing a tire, etc. may result in burns.
●
Failure to follow these precautions could cause the wheel nuts to loosen
and the tire to fall off, resulting in death or serious injury.
• Have the wheel nuts tightened with a torque wrench to 131 N•m (13.4
kgf•m, 97 ft•lbf) aluminum wheel, 209 N•m (21.3 kgf•m, 154 ft•lbf) steel
wheel, as soon as possible after changing wheels.
• When installing a tire, only use wheel nuts that have been specifically
designed for that wheel.
• If there are any cracks or deformations in the bolt screws, nut threads
or bolt holes of the wheel, have the vehicle inspected by your Toyota
dealer.
• Do not attach a heavily damaged wheel ornament, as it may fly off the
wheel while the vehicle is moving.
• When installing the wheel nuts, be sure to install them with the tapered
ends facing inward. (→P. 451)
■

Replacing a flat tire for vehicles with power back door

In cases such as when replacing tires, make sure to turn off the power back
door main switch (→P. 55). Failure to do so may cause the back door to
operate unintentionally if the power back door switch is accidentally touched,
resulting in hands and fingers being caught and injured.
5-2. Steps to take in an emergency
5
549