2-1. Driving procedures
Turn signal lever
■
Turn signals can be operated when
Vehicles without a smart entry & start system
The engine switch is in the "ON" position.
Vehicles with a smart entry & start system
The "ENGINE START STOP" switch is in IGNITION ON mode.
■
If the indicators flash faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned
out.
204
Left turn
Right turn
Move and hold the lever
partway to signal a lane
change.
The left hand signal will flash
until you release the lever.
Move and hold the lever
partway to signal a lane
change.
The right hand signal will flash
until you release the lever.