Operation Of The “Engine Start Stop” Switch; If The Engine Does Not Start; Steering Lock - Toyota GT86 Owner's Manual

2-1. Driving procedures

Operation of the "ENGINE START STOP" switch
When operating the "ENGINE START STOP" switch, one short, firm press is
enough. If the switch is pressed improperly, the engine may not start or the
"ENGINE START STOP" switch mode may not change. It is not necessary to
press and hold the switch.

Electronic key battery depletion
P. 44

Conditions affecting operation
P. 40

Note for the entry function
P. 41


If the engine does not start

The engine immobilizer system may not have been deactivated. (P. 91)
Contact any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional.


Steering lock

After turning the "ENGINE START STOP" switch off and opening and closing
the doors, the steering wheel will be locked due to the steering lock function.
Operating the "ENGINE START STOP" switch again automatically cancels
the steering lock.
174
Vehicles with an automatic transmission:
Check that the shift lever is securely set
in P. The engine may not start if the shift
lever is displaced out of P. The smart
entry & start system indicator light (green)
will flash quickly.