Changing "ENGINE START STOP" switch mode
Modes can be changed by pressing the "ENGINE START STOP"
switch with the brake pedal (vehicles with a Multidrive) or clutch
pedal (vehicles with a manual transmission) released. (The mode
changes each time the switch is pressed.)
iQ_WE_74014E
2-1. Driving procedures
*
OFF
Emergency flashers can be
used.
ACCESSORY mode
Some electrical components
such as the audio system can
be used.
The "ENGINE START STOP"
switch indicator turns amber.
IGNITION ON mode
All electrical components can
be used.
The "ENGINE START STOP"
switch indicator turns amber.
*
:For vehicles with a Multid-
rive, if the shift lever is in a
position other than P when
turning off the engine, the
"ENGINE
START
switch will be turned to
ACCESSORY mode, not to
OFF.
2
STOP"
181