Videotron EMG2926-Q10A User Manual page 84

Figure 52 Network > Wireless LAN 2.4G/5G > General: WPA/WPA2
The following table describes the labels on this screen.
Table 33 Network > Wireless LAN 2.4G/5G > General: WPA/WPA2
LABEL DESCRIPTION
Security Mode Select WPA or WPA2 to enable data encryption.
WPA Compatible This check box is available only when you select WPA2-PSK or WPA2 in the Security
Mode field.
Select the check box to enable both WPA2 and WPA wireless clients to communicate
with the EMG2926-Q10A even when the EMG2926-Q10A is using WPA2-PSK or WPA2.
Group Key Update The Group Key Update Timer is the rate at which the AP (if using WPA-PSK/
Timer WPA2-PSK key management) or RADIUS server (if using WPA/WPA2 key
management) sends a new group key out to all clients. The re-keying process is the
WPA/WPA2 equivalent of automatically changing the WEP key for an AP and all
stations in a WLAN on a periodic basis. You can set the Group Key Update Timer in
WPA-PSK/WPA2-PSK mode.
PMK Cache Period This field is only available if you select WPA2.
Specify how often wireless clients have to resend usernames and passwords in order
to stay connected. Enter a time interval between 10 and 999,999 minutes.
Note: If wireless client authentication is done using a RADIUS server, the
Chapter 9 Wireless LAN
reauthentication timer on the RADIUS server has priority.
EMG2926-Q10A User's Guide
84