Videotron EMG2926-Q10A User Manual page 116

Table 56 Network > Static Route: Add/Edit
LABEL DESCRIPTION
Destination IP This parameter specifies the IP network address of the final destination. Routing is always
Address based on network number. If you need to specify a route to a single host, use a subnet
mask of 255.255.255.255 in the subnet mask field to force the network number to be
identical to the host ID.
IP Subnet Mask Enter the IP subnet mask here.
Gateway IP Enter the IP address of the next-hop gateway. The gateway is a router or switch on the
Address same segment as your EMG2926-Q10A's interface(s). The gateway helps forward packets
to their destinations.
Back Click Back to return to the previous screen without saving.
Apply Click Apply to save your changes to the EMG2926-Q10A.
Cancel Click Cancel to reset every field in this screen to the last saved value.
Chapter 14 Static Route
EMG2926-Q10A User's Guide
116