Videotron EMG2926-Q10A User Manual page 150

Figure 109 Management > USB Media Sharing > SAMBA
The following table describes the labels on this screen.
Table 71 Management > USB Media Sharing > SAMBA
LABEL DESCRIPTION
Enable SAMBA Select this to enable file sharing through the EMG2926-Q10A using Windows Explorer or
by accessing your work group.
Name Specify the name to identify the EMG2926-Q10A in a work group.
Work Group You can add the EMG2926-Q10A to an existing or a new work group on your network.
Enter the name of the work group which your EMG2926-Q10A automatically joins. You
can set the EMG2926-Q10A's work group name to be exactly the same as the name of
the work group to which your computer belongs.
Note: The EMG2926-Q10A will not be able to join the work group if your local area
Description Enter a description for the EMG2926-Q10A on the work group.
USB1/2 Specify the user's access rights for the USB storage device connected to the EMG2926-
Q10A's USB port.
Read & Write - The user has read and write rights, meaning that the user can create
and edit files on the connected USB device.
Read - The user has read rights only and can not create or edit files on the connected
USB device.
User Accounts Before you can share files, you need a user account. Configure the following fields to set
up a file-sharing account.
# This is the index number of the user account.
Chapter 22 USB Media Sharing
network settings restrict it from doing so. In this case, contact your network
administrator.
EMG2926-Q10A User's Guide
150