Table 73 Management > Port Configuration (continued)
LABEL
DESCRIPTION
Duplex
Select the duplex mode of the Ethernet connection on this port. The choices are Auto,
Full and Half.
Selecting Auto (auto-negotiation) allows one port to negotiate with a peer port
automatically to obtain the duplex mode that both ends support. If the peer port does
not support auto-negotiation or turns off this feature, the EMG2926-Q10A will
determine the connection speed by detecting the signal on the cable and using half
duplex mode.
Apply
Click Apply to save your changes with the EMG2926-Q10A.
Cancel
Click Cancel to begin configuring this screen afresh.
Chapter 23 Port Configuration
EMG2926-Q10A User's Guide
157