Videotron EMG2926-Q10A User Manual page 44

Table 18 Status Screen Icons (continued)
ICON
The following table describes the labels shown on the Status screen.
Table 19 Status Screen: Router Mode
LABEL
Device Information
Host Name
Model Number
Firmware Version
Sys OP Mode
WAN Information
MAC Address
IP Address
IP Subnet Mask
Default Gateway
IPv6 Address
LAN Information
MAC Address
IP Address
IP Subnet Mask
DHCP
IPv6 Address
6rd Information
This section is available only when you set IPv6 Tunneling to 6RD in the Network > WAN screen.
IPv6 Address
IP Border Router
WLAN 2.4G Information
WLAN OP Mode
MAC Address
SSID
Channel
Security
WLAN 5G Information
Chapter 5 Router Mode
DESCRIPTION
Click this icon to see the Status page. The information on this screen depends on the
device mode you select.
Click this icon to see the Monitor navigation menu.
Click this icon to see the Configuration navigation menu.
Click this icon to see the Maintenance navigation menu.
DESCRIPTION
This is the System Name to enter in the Maintenance > General screen for identification
purposes.
This is your device's model number.
This is the firmware version and the date it was created.
This is the device mode to which the EMG2926-Q10A is set - Router Mode.
This is your device's WAN Ethernet adapter MAC Address.
This is the WAN port's IP address.
This is the WAN port's subnet mask.
This is the WAN port's gateway IP address.
This is the IPv6 address of the EMG2926-Q10A on the WAN.
This is the LAN Ethernet adapter MAC Address of your device.
This is the LAN port's IP address.
This is the LAN port's subnet mask.
This is the LAN port's DHCP role - Server or Disable.
This is the IPv6 address of the EMG2926-Q10A on the LAN.
This is the relay server's IPv6 address.
This is the IPv4 address of the ISP's border relay server, which helps forward IPv6 packets
from the local network to IPv6 networks.
This is the device mode to which the EMG2926-Q10A's wireless LAN is set - Access Point
Mode.
This is your device's 2.4GHz wireless adapter MAC Address.
This is a descriptive name used to identify the EMG2926-Q10A in the 2.4GHz wireless LAN.
This is the channel number selected manually.
This is the wireless security level the EMG2926-Q10A is using.
EMG2926-Q10A User's Guide
44