Videotron EMG2926-Q10A User Manual page 53

The instructions require that your hardware be connected (see the Quick Start Guide) and that you
be logged into the Web Configurator through your LAN connection (see
Make sure the WIFI switch (on the EMG2926-Q10A's side panel) is set to ON.
1
Open the Configuration > Network > Wireless LAN 2.4G > General screen in the AP's Web
2
Configurator.
Confirm that the wireless LAN is enabled on the EMG2926-Q10A.
3
Enter SSID_Example3 as the SSID and select Channel-06 as the channel. Set security mode to
4
WPA2-PSK and enter ThisismyWPA-PSKpre-sharedkey in the Pre-Shared Key field. Click
Apply.
Chapter 6 Tutorials
EMG2926-Q10A User's Guide
53
Section 2.2 on page 18).