Videotron EMG2926-Q10A User Manual page 105

Figure 73 Network > DHCP Server > Client List
The following table describes the labels on this screen.
Table 49 Network > DHCP Server > Client List
LABEL DESCRIPTION
# This is the host computer's index number.
Status This field displays whether the connection to the host computer is up (yellow lightbulb) or
down (grey lightbulb).
Host Name This field displays the computer host name.
IP Address This field displays the IP address relative to the # field listed above.
MAC Address This field shows the MAC address of the computer with the name in the Host Name field.
Every Ethernet device has a unique MAC (Media Access Control) address which uniquely
identifies a device. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02.
Reserve Select this if you want to reserve the IP address for this specific MAC address.
Apply Click Apply to save your changes to the EMG2926-Q10A.
Cancel Click Cancel to reload the previous configuration for this screen.
Chapter 11 DHCP Server
EMG2926-Q10A User's Guide
105