Videotron EMG2926-Q10A User Manual page 48

Table 20 Navigation Panel: Router Mode (continued)
LINK TAB
Parental Parental
Control
Control
Parental
Monitor
IPv6 firewall Services
Management
StreamBoost Network
MGMT
Bandwidth
Priorities
Up Time
Downloads
PerDevice
PerFlow
Remote WWW
MGMT
SNMP
Wake On LAN
UPnP General
USB Media DLNA
Sharing
SAMBA
FTP
Port Port
Configuration
Configuration
USB Print Print Server
Server
Mail My Mail
MAINTENANCE
General General
Account User Account
Backup/ Backup/
Restore
Restore
Restart System
Restart
Sys OP Mode Sys OP Mode
Chapter 5 Router Mode
FUNCTION
Use this screen to configure a restricted access schedule and/or URL
filtering settings to block the users on your network from accessing certain
websites.
Use this screen to set a schedule and have the EMG2926-Q10A send a
notification when the specified user connects to the EMG2926-Q10A at the
scheduled time.
Use this screen to configure IPv6 firewall rules.
Use this screen to view rates of data transmission between the EMG2926-
Q10A and the Internet or connected devices.
Use this screen to configure the maximum allowable bandwidth and enable
automatic updates.
Use this screen to change the priority of the connected devices.
Use this screen to view the top five traffic flows transmitting to/from the
selected LAN device(s).
Use this screen to view the type and percentage of most download traffic.
Use this screen to view the percentage of bandwidth used by the connected
LAN/WLAN devices.
Use this screen to view the percentage of bandwidth used by a traffic flow.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the EMG2926-Q10A.
Use this screen to change your EMG2926-Q10A's SNMP settings.
Use this screen to enable Wake on LAN to remotely turn on a device on the
local network.
Use this screen to enable UPnP on the EMG2926-Q10A.
Use this screen to have the EMG2926-Q10A function as a DLNA-compliant
media server, that lets DLNA-compliant media clients play video, audio, and
photo content files stored on the connected USB storage device.
Use this screen to enable file sharing through the EMG2926-Q10A.
Use this screen to have the EMG2926-Q10A act as a FTP server.
Use this screen to change the Ethernet port speed and duplex settings.
Use this screen to enable the print server function on the EMG2926-Q10A.
Use this screen to configure the mail server information.
Use this screen to view and change administrative settings such as system
and domain names.
Use this screen to change the password of your EMG2926-Q10A.
Use this screen to backup and restore the configuration or reset your
EMG2926-Q10A to its factory defaults.
This screen allows you to reboot the EMG2926-Q10A without turning the
power off.
This screen allows you to select whether your device acts as a router, or an
access point.
EMG2926-Q10A User's Guide
48