Videotron EMG2926-Q10A User Manual page 161

The following table describes the labels on this screen.
Table 75 Management > Mail
LABEL DESCRIPTION
Mail Server Select Default to use the pre-defined mail server to send or receive mail messages.
Select Custom to specify a different mail server.
Mail Server Address If you select Default in the Mail Server field, this will show the pre-defined mail server
address and will not be configurable.
If you select Custom in the Mail Server field, enter the server name or the IP address
of the mail server for the e-mail address specified in the Account Email Address field
Mail Server Port Specify a mail server port. Enter port 25 if you are using a mail server from your ISP.
Enter port 587 if you are using your own mail server that is not on your ISP's network.
Authentication Enter the user name (up to 32 characters). This is usually the user name of the mail
Username account you specified in the Account Email Address field.
Authentication Enter the password associated with the user name above.
Password
Account Email Enter the email address that you want to be in the from/sender line of the email
Address notification that the EMG2926-Q10A sends.
Email Enter the email address to which outgoing email is delivered and click Add to add it to
the Send To list.
# This is the index number of an email address in the list.
Email This is the email address to which outgoing email is delivered.
Modify Click the Edit icon to open a screen where you can change the email address.
Click the Delete icon to remove an existing entry.
Apply Click Apply to save your changes to the EMG2926-Q10A.
Cancel Click Cancel to begin configuring this screen afresh.
Chapter 25 Mail
EMG2926-Q10A User's Guide
161