Loading & Saving Settings, Timers; Load Settings; Save Settings; Timers - Triax S-209CX User Manual

Setup
Loading & Saving Settings, Timers

Load Settings

This setting loads the most recently saved channel
table and settings profile.
• Press MENU on the remote control.
• Select Setup and press the OK button.
• Select Load Settings and press OK.
A confirmation message will be displayed
• Select YES and press OK to confirm loading the
settings, or select NO and press OK to cancel.

Save Settings

This setting saves channel tables and settings as
a setting profile, which can be loaded via the use
of the Load Settings menu item.
• Press MENU on the remote control.
• Select Setup and press the OK button.
• Select Save Settings and press the OK button.
A confirmation message will be displayed.
• Select YES and press the OK button to confirm
saving the settings.
24

Timers

• Press MENU on the remote control.
• Select Timers and press OK.
• Press the YELLOW button on the remote control.
The Add Timer window is displayed.
"◄"/"►"
Channel: Use the
through the channel list.
Record Type: Record type will be displayed.
Date: The date that the record is to start.
Start: When the record is to start.
End: When the record is to stop.
Duration: Duration between Start and End time.
Repeat: Specifies if the record is to occur only
once or on a daily, or weekly basis.
Playback: Use parental settings or select allow/
disallow to set parental playback options.
Change/Delete: Permits or prohibits other users
from making modifications.
Green button: Saves the modification.
Red button: Cancels the modification made.
Blue button: Deletes saved recording times.
buttons to navigate the