Conditional Access - Triax S-209CX User Manual

Setup

Conditional Access

Conditional Access/Cardreader
Some channels cannot be accessed without use
of a smartcard.
• Switch off the set-top box and unplug to from the
mains.
• Insert the smard card into the set-top box.
• Connect the set-top box to the mains supply.
• Turn on the set-top box and wait until the card is
activated.
• Press MENU.
• Select Conditional Access and press OK.
• Refer to the smard card instruction manual for
details of the settings.
IMPORTANT: The smart card or the set-top box
may be damaged if the card is forcefully inserted.
Filtering Channels
• Press the P<P button to activate the Channel
List Filter function.
▲ ▼
and use " "/" " button to set the desired option.
Only Filtered channels will be available for viewing
if filter mode is not disabled.
• Press the YELLOW button on the remote control.
The "Add Timer" window is displayed.
"◄"/"►"
Channel: Use the
the through the channel list.
Record Type: Record type will be displayed.
Date: Enter the date that the record is to start via
"◄"/"►"
the and numeric buttons.
Start: Enter the time that the record is to start via
"◄"/"►"
the and the numeric buttons.
End: Enter the time that the record is to finish via
"◄"/"►"
the and the numeric buttons.
Duration: Duration between Start and End time.
Repeat: Specify if the record is to occur only once
or on a daily, or weekly basis.
Playback: Use parental settings or select allow/
disallow to set parental playback options.
Change/Delete: Permits or prohibits other user
from making modifications.
Green button: Saves the modification.
Red button: Cancels the modification made.
Blue button: Deletes saved recording times.
buttons to navigate
25