Recording - Format Hdd - Internet; Recording Configuration; Internet Settings - Triax S-209CX User Manual

Setup

Recording - Format HDD - Internet

Recording Configuration

Select Recording Configuration and press OK.
The following options are available:
Discard
This setting defines if exisitng recording files will be
deleted when the USB storage device is full AND
a timer is set to record.
None: No recordings will be deleted and the
requested timer recording will not start.
Oldest: The oldest recordings will be deleted to make
space for the timer recording.
Longest: The longest (largest file size) recordings
will be deleted to make space for the timer recording.
Shortest: The shortest (smallest file size) recordings
will be deleted to make space for the timer recording.
Unplayed: Recordings that have not been played will
not be deleted if EXCLUDED is selected. Selecting
INCLUDED results in recordings being deleted if they
have been played.
Format HDD
The Format HDD tool can be used to help solve
most USB storage media problems. ALL content
on the attached USB hard-disk or memory stick
is deleted, and the storage media is formatted in
FAT32 format.
Important: Back up important recordings on
the USB storage media before using the Format
HDD tool.
• Select Format HDD and press OK.
• Enter the PIN number when requested and press
the OK.
Note: The PIN number is '0000' unless this has
previous been modified.
• Select YES and press OK to format the hard disk
or select NO and press OK to cancel.
Max Timeshift
• Select the maximum period to be recorded when
timeshift recording is used.
22

Internet Settings

The Internet Settings tool is used to configure a
wired network connection for accessing Internet
and/or DLNA Media Server content.
• Check that a network cable has been inserted
into the set-top box's network port.
• Press MENU on the remote control.
• Select Setup and press the OK button.
• Select Internet Settings and press the OK button.
The following options are available:
Disable (Red button). Network access will be
disabled.
Static (Yellow button). Allows manual configuration
of the fields in the Internet Settings window.
Dynamic (Blue button). The default setting;
automatically populates the fields with data from
the router.
Internet Speed Test (Green button). Used to test
the data transfer speed from the router to the set-
top box.