First Time Installation; Selcting Language; Specifying Country; Direct Scan - Triax S-209CX User Manual

Getting Started

First Time Installation

The First Time Installation menu is displayed
when the set-top box is started for the first time.
The First Time Installation menu is
NOTE:
also displayed when the set-top box is started from
standby mode AND there no channels are stored
in the channel list.
The set-top box is also reset by selecting
NOTE:
the First Time Installation function.
Selecting Language
• Select the desired language (with "
buttons).
• Press OK.
Specifying Country, TV Type, Display
Format, Resolution
• Select the relevant Country, TV type, Display
Format and HD output resolution (with "
"◄"/"►"
and buttons).
• Press OK.
8
Automatic Channel Scan
• Select one of the four following antenna types
with the
Direct:
• Select this antenna type it it is directly connected
to the receiver, and press OK..
• Choose a satellite in the next window and press
OK to start searching for channels.
▲ ▼
"/" "

Unicable:

• Select this antenna type if multiple receivers are
used within a unicable system, and press OK.
• Follow the instructions on the screen and press
OK to start searching for channels.
▲ ▼
"/" "

DiSEqC switch:

• Select this antenna type if multiple antennas and
an DiSEqC switch are used, and press OK.
• Follow the instructions on the screen and press
OK to start searching for channels.
"◄"/"►"
buttons: