Copy Settings To Usb Device; Restore Settings From Usb Device; Epg (Electronic Programme Guide) - Triax ST-HD527 CI Manual

o
HDD Manager also allows access to the following functions:
 DELETE – To delete a recorded programme press the RED button on the
RCU. A banner asking for confirmation is displayed, select OK to confirm.
Note: a deleted programme is permanently deleted from the hard drive.
 FORMAT HDD – To format your hard drive, press the GREEN button on the
RCU.

REMOVE USD - To safely remove your USB Memory device, press the
YELLOW button on the RCU. Select OK before removing the device.

To view a recorded programme, select a recorded programme from the
recording list and:
 Press the BLUE button on the RCU to view in the preview screen.
(Pressing the "" plays the recording full screen).
 Press the "" button on the RCU directly to view the recorded
programme full screen.
 Press "MENU" on the RCU to "RENAME" the recorded programmes, (via
a keypad display) or to "SORT" the recorded programmes, (by date or
Channel name).

7.3 Copy Settings to USB Device

This allows the receiver settings and channel list to be downloaded to a USB device. (The
file is saved as "userdata.bin").

7.4 Restore Settings from USB Device

This allows receiver settings and channel list to be uploaded from a USB device. This is an
useful and user-friendly procedure when several receivers are required to have the same
settings and channels installed.
8.0 EPG (Electronic Program Guide)
The EPG function displays the TV Guide (or Radio Guide if you are listening to radio
channels). It is accessed by pressing the "GUIDE" button on the RCU.
Date and time information is listed horizontally and channels are listed vertically. Use the
"," and " " buttons on the RCU to navigate within the EPG screen. Programme
schedules are displayed within the table.
A 7 Day EPG is displayed for Terrestrial channels while a Now and Next EPG is displayed
for Satellite channels.
Within the EPG screen there are also functions controlled using the coloured buttons on the
RCU:
Press the YELLOW button on the RCU to move the programme schedule
forward 6 hours.
Press the GREEN button on the RCU to move the programme schedule
back 6 hours.
Press the RED button on the RCU to set a timer from the EPG data.
Press the BLUE button on the RCU for additional programme information
"
No Information yet" message will be shown if the selected channel information
Note: A
has not yet been received or if the channel does not provide EPG data.
25