Bank Select - Yamaha STAGEA ELS-02 Owner's Manual

Registration Shift
To set the User Registration order:
1
Select a Bank.
2
Press the desired numbered button in
the Registration Memory section.
3
Press the DATA [SET] button in the
display.
The Bank letter and Registration number appear in
the display, indicating that the Registration is
entered.
4
Repeat steps 2 and 3 above to set the
Registration order.
4
1
1 POSITION
These are cursor controls used to move the cursor
(colored orange) along the Registration row in the
display. Entered Registration numbers are shown in
boxes, while the numbers in the row above indicate the
position in the sequence (in other words, the number of
successive presses of the Right Footswitch). Up to 400
steps (Registrations) can be memorized.
Moves the cursor to the first position.
Moves the cursor one step to the left.
Moves the cursor one step to the right.
Moves the cursor five steps to the right.
2 DATA
These are data controls used to enter and delete
Registration numbers in the Registration row.
SET: For initially entering a Registration number to a
blank space in the Registration row, or for replacing a
number at the current cursor position.
To enter a number, press the desired Registration
Memory button (the selected button will light), then
press [SET] in the display. The entered Registration
number will appear in the Registration row. After using
SET to enter Registrations, the cursor can be moved
among the numbers.
100 ELS-02/ELS-02C Owner's Manual
Registration row
INSERT: For inserting a Registration number just before
the current cursor position.
To perform the operation, first move the cursor to a
numbered position. Then, press the desired Registration
Memory button (the selected button will light), and press
[INSERT] in the display. The new Registration number is
inserted at the cursor position and all other numbers to
the right of the cursor are moved to accommodate the
new numbers.
Registration numbers cannot be entered beyond the
Registration Shift function's capacity of 400. If the insert
operation exceeds this capacity, a "Data Full" message
appears and the operation cannot be executed.
DELETE: For deleting a Registration number at the
current cursor position. To delete the unnecessary
number, move the cursor to a numbered position and
press [DELETE] in the display.
CLEAR: For erasing all current user Registration Shift
settings. After selecting [CLEAR], a message appears
3
prompting confirmation of the operation.
Select [CLEAR] to clear all data. The message "Clear all
data" momentarily appears in the display and returns to
the previous display.
Select [CANCEL] to abort the operation.
2
3 SHIFT END
Determines how to end the Registration Shift function.
STOP: Selects the last Registration and quits the
operation.
TOP: After the last preset is reached, the first preset is
called up again, starting the sequence over again from the
beginning.
NEXT UNIT: After the last preset is reached, the next
Unit in the Song is called up. This function is available
only when two or more Unit sets are saved to one Song.
Reference page
• Saving Two or More Registration Units in a Song (page 118)
NOTE
• When you play the Song using Next Unit function, always press
the [R] (Play) button in the MDR display to start the Song and
activate these functions. The [CUSTOM] (Custom Play) button
(page 107) will not activate the Next Unit function.
• When you use the Next Unit function during Rhythm playback,
Rhythm Sequence and User Rhythm cannot be loaded.
The Shift End mark (
at the end of the Registrations you entered when Top or
Next Unit is selected as the Shift End.

4 BANK SELECT

Selects the Bank which contains the desired Registration.
or ) will automatically be put