About the lamp status
• Red:
• Green: Data registered but not currently selected
• Off:
5
Register various panel setups to other buttons by repeating steps 1 – 4.
The registered panel setups can be recalled by simply pressing the desired number button.
NOTE
The panel setups registered in the numbered buttons are preserved even when you turn off the power. If you want to delete all the
eight current panel setups, turn the power on while holding the B6 key (right-most B key on the keyboard).
Saving the Registration Memory as a Bank File
You can save all eight registered panel setups as a single Registration Memory Bank file.
1
Press the REGIST BANK [+] and [-] buttons simultaneously to call up the
9
Registration Bank Selection Display.
NOTE
In general, Registration Memory data (Bank files) is compatible among the models CVP-709/705/701. However, the data may not be
perfectly compatible, depending on the specifications of each model.
1
2
Call up MENU2 at the right bottom of the display by pressing the [8] button
as necessary.
98
CVP-701 Owner's Manual
Data registered and currently selected
No data registered
Bank 04
Bank 03
Bank 02
Bank 01
3
2