Saving The Recorded Data As A Bank File; Recalling The Chord Looper Bank File And Playing Back A Style With A Chord Sequence - Yamaha PSR-SX900 Reference Manual

Saving the Recorded Data as a Bank File

The eight memorized chord sequences are can be saved as a single Chord Looper Bank (*.clb) file.
1
Record the desired chord sequence, and then memorize to the number [1]–[8].
To record the chord sequence, see
To memorize the recorded data, see
2
Touch (Save) to save the data in the Chord Looper Memory [1]–[8] as a single Bank
file.
NOTICE
If you select a Chord Looper Bank file before saving the edited data, the data will be lost.
NOTE
Each Chord Looper Memory is named automatically such as "CLD_001," but it can be renamed by exporting the file and import it
Recalling the Chord Looper Bank File and Playing Back a Style with a
Chord Sequence
1
Select a Style.
2
Load the Chord Looper Bank name to call up the Chord Looper Bank Selection display,
and then select the desired Bank.
3
Touch the Chord Looper Memory number you wish to use first.
NOTE
Touch [On/Off] to turn it on here, if you want to start automatic Style playback from the beginning of your performance.
NEXT PAGE
16
PSR-SX900/SX700 Reference Manual
page 14 or refer to the Owner's Manual.
page 15.
2
1
(page 17).
2
Chord Looper Bank file name
3
Same as the CHORD LOOPER
[REC/STOP] and [ON/OFF] buttons.