Formatting A Usb Flash Drive - Yamaha STAGEA ELS-02 Owner's Manual

Formatting a USB Flash
Drive
If you find that you are unable to use a new, blank USB
flash drive or an old one that has been used with other
devices, you may need to format it.
Formatting erases all the data in the USB flash drive and
makes it ready to record. The data erased by formatting
will be lost permanently. Check whether or not the USB
flash drive contains any important data you wish to keep
before executing the operation. Proceed with caution,
especially when connecting multiple USB storage media.
NOTE
Before purchasing a USB flash drive, please consult your
Yamaha dealer, or an authorized Yamaha distributor for advice,
or see the Yamaha website:
http://download.yamaha.com/
1
Connect the USB flash drive to the [USB
TO DEVICE] terminal.
2
Press the [TOOLS] button at the top
right of the display to call up the TOOLS
Page.
3
Press the (UP) button repeatedly
if necessary until the button is grayed
out.
4
Select the desired USB flash drive you
want to format.
The indications USB 01, USB 02, etc. will be
displayed depending on the number of the
connected USB flash drives.

Formatting a USB Flash Drive

5
Press the [FORMAT] button in the
display.
A message appears, prompting confirmation of the
operation. Select [FORMAT] to format the USB
flash drive, or [CANCEL] to abort the operation.
NOTICE
Do not remove the USB flash drive while formatting.
ELS-02/ELS-02C Owner's Manual
7
111