Disassembly of the control panel ASSY
1) Place the control panel ASSY upside down.
2) Pull the "X" latch outwards to release the front edge of the control panel PCB L and remove it
to the front. Remove the rubber keypad L.
3) Pull the two "Y" latches outwards to release the front edge of the control panel PCB R and
remove it to the front. Remove the rubber keypad R.
Remove the scanner open sensor actuator. The actuator spring also comes off.
Control panel PCB R
Rubber keypad R
Search/Speed Dial
Sensor actuator spring
Scanner open sensor actuator
Reassembling Notes
• When setting the control panel ASSY back to the scanner cover, pass the panel-center panel
harness through the square opening provided in the scanner cover (see the illustration on the
previous page.)
Control panel PCB L
Control panel (placed upside down)
(Front)
"Y" latches
5 - 2 6
Panel-center panel
harness
Rubber keypad L
"X" latch
Confidential