Control Box With Long Cable Outside Platform - Skyjack SJIII 3219 Operating Manual

Section 3 - Operation
• Ensure the operator and control box
console are properly oriented in the
direction the aerial platform is facing (see
Figure 3-11).
• Do not drive the aerial platform toward
yourself.
• Avoid crushing hazards; stand clear from
the aerial platform and out of the direction
of travel.
• During loading/unloading operations using
a ramp, ensure all personnel (including
operator) stand away from the direction of
any potential fall-over of the aerial platform
from the ramp or movement of the aerial
platform down the ramp.
• Ensure that the control box with long cable
does not become entangled with the aerial
platform or any surrounding objects.
5. Perform a thorough jobsite inspection prior to
operating the aerial platform to identify potential
hazards in your work area.
Rear Side
SJIII DC Electric
WARNING
Figure 3-11. Control Box with Long Cable Outside Platform
6. Cordon-off the pathway in which you intend to
travel.
7. Ensure there are no personnel in the intended
path of travel.
8. Notify those around the pathway that you will be
moving the aerial platform.
9. Use a spotter to guide movement where necessary.
Ensure the spotter remains at a safe distance.
10. Once safely reached your destination, push in
emergency stop button and turn main power
disconnect switch to "
Ensure that you maintain three points of
contact when using the ladder to mount/
dismount platform.
11. Mount the platform control console to mounting
bracket at the front right portion of the platform.
Component Identification
" off position.
WARNING
Front Side
Page 43