Hydraulic/Electric Tray Side - Skyjack SJIII 3219 Operating Manual

Visual & Maintenance Inspection
SJIII 3219
Emergency Lowering
Access Rod
Greasing Point

2.3-7 Hydraulic/Electric Tray Side

-
Ensure tray latch is secure and in proper
working order.
• Pothole Protection Device
-
Ensure mechanisms have no sign of
visible damage and are free from dirt and
obstructions.
• Hydraulic Tank
-
Ensure hydraulic filler cap is secure.
-
Ensure tank shows no visible damage
and no evidence of hydraulic leakage.
• Hydraulic Oil
-
Ensure platform is fully lowered, and then
visually inspect the sight gauge located
on the side of the hydraulic oil tank.
-
The hydraulic oil level should be at or
slightly above the top mark of the sight
glass.
• Hydraulic Pump and Motor
-
Ensure there are no loose or missing
parts and there is no visible damage.
• SkyCoded Panel
-
Ensure panel is properly secured and
there is no visible damage.
-
Ensure there are no loose wires or
missing fasteners.
Page 22
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
Main Manifold
Hydraulic Pump and
Motor
contained in this operating manual and on the aerial platform.
Section 2 - Familiarization
Greasing Point
SkyCoded Panel
Hydraulic Tank
• Main Manifold
-
Ensure all fittings and hoses are properly
tightened and there is no evidence of
hydraulic leakage.
-
Ensure there are no loose wires or
missing fasteners.
• Emergency Lowering Access Rod (If
Equipped)
-
Ensure rod is properly secured and there
is no visible damage.
Hydraulic/Electric
Tray
SJIII DC Electric