Control Box With Long Cable Outside Platform - Skyjack SJIII 4740 Operating Manual

Section 3 - Operation
• Ensure the operator and control box
console are properly oriented in the
direction the MEWP is facing (see
3-11).
• Do not drive the MEWP toward yourself.
• Avoid crushing hazards; stand clear from
the MEWP and out of the direction of travel.
• During loading/unloading operations using
a ramp, ensure all personnel (including
operator) stand away from the direction of
any potential fall-over of the MEWP from
the ramp or movement of the MEWP down
the ramp.
• Ensure that the control box with long cable
does not become entangled with the MEWP
or any surrounding objects.
5. Perform a thorough jobsite inspection prior to
operating the MEWP to identify potential hazards
in your work area.
Rear Side
SJIII 4740
WARNING
Figure
Figure 3-11. Control Box with Long Cable Outside Platform
6. Cordon-off the pathway in which you intend to
travel.
7. Ensure there are no personnel in the intended
path of travel.
8. Notify those around the pathway that you will be
moving the MEWP .
9. Use a spotter to guide movement where necessary.
Ensure the spotter remains at a safe distance.
10. Once safely reached your destination, push in
emergency stop button and turn main power
disconnect switch to "
Ensure that you maintain three points of
contact when using the ladder to mount/
dismount platform.
11. Mount the platform control console to mounting
bracket at the front right portion of the platform.
Component Identification
" off position.
WARNING
Front Side
Page 43